Trapezoid T85 - Structural and Support Profile

Trapezoidal sheets are produced on new modern technological lines, with the high accuracy and speed processing. A thorough inspection of the entire production process, guarantee quality of supplied sheets. Steel trapezoidal profiles are produced by cold forming of surface-treated steel sheet.
For trapezoidal sheet is recommended roof slope of 8 degrees.
Used materials:
  • Galvanized steel sheets of different grades of zinc coat from 200 g / m2
  • Lako-plastic metal sheet made from a steel,  sheet metal hot dip galvanized on both sides, zinc coating at least 200 g / m2, passivation, protective paint thickness min. 7 microns.
  • Lako final layer consists of a plastic-coating on polyester basis, width min. 25 mic.
  • Durability of the treated sheets, under normal conditions min. 40 years.
Trapezoidal sheets can be made of aluminum, copper, titanium-zinc sheets and the other materials determined by the agreement.
Trapezoidal profile T85 is mainly used as a structural element supporting constructions and create permanent formwork, folded insulated ceilings and so on. T 85 are made of material thickness from 0.70 mm to 1.25 mm.

Total width Effective width Material thickness Production length
980 mm 930 mm from 0,70 mm from 0,5 m
    to 1,25 mm to 12 m