Trapezoid T153 - Structural and Support Profile

Trapezoidal sheets are produced on new modern technological lines, with the high accuracy and speed processing. A thorough inspection of the entire production process, guarantee quality of supplied sheets. Steel trapezoidal profiles are produced by cold forming of surface-treated steel sheet.
 
For trapezoidal sheet is recommended roof slope of 8 degrees.
 
Used materials:
  • Galvanized steel sheets of different grades of zinc coat from 200 g / m2
  • Lako-plastic metal sheet made from a steel,  sheet metal hot dip galvanized on both sides, zinc coating at least 200 g / m2, passivation, protective paint thickness min. 7 microns.
  • Lako final layer consists of a plastic-coating on polyester basis, width min. 25 mic.
  • Durability of the treated sheets, under normal conditions min. 40 years.
Trapezoidal sheets can be made of aluminum, copper, titanium-zinc sheets and the other materials determined by the agreement.
 
T 153 construction and support profile is used in cases of larger distances beams. Trapezoidal profile T-153 are made of a thickness from 0.75 mm to 1.5 mm.
 
t153

Total width Effective width Material thickness Production length
880 mm 840 mm from 0,75 mm from 0,5 m
    to 1,50 mm to 12 m