ŠKRIDPLECH - lightweight roofing

ŠKRIDPLECH - strešná krytina MASLEN

ŠKRIDPLECHŠKRIDPLECH is made of steel sheet cold-formed into a symmetrical shape with lateral overhangs. Shape recalls some classic roof tiles. The module of one tile is 350 or 400 mm, wave height is 19 mm and the height of the embossment 20 mm. Steel roof tile ŠKRIDPLECH is intended for the creation of lightweight roofs with a roof slope of at least 16 ° to the transverse joints, or a roof slope of 12 ° without cross-joints. Axial distance of lathing is 350 mm (400 mm).

Initial thickness of sheet is 0.5 mm and a length of module 350 mm  (400 mm) and a wave height of 19 mm. It comes in lengths of the bands from 850 mm to 6000 mm. For production use, the Zn layer sheet 200-275 g / m2 polyester-passivation of a total thickness of 25 microns from the top side. The matt finish 35 microns and design AkzoNobel to 50 microns. It comes in a wide range of colors. Width of the entrance of the sheet is 1250 mm.

Company MASLEN used in the manufacture of roofing ŠKRIDPLECH only plate coated with ZN 275 g / m2 and more - despite the fact that the standard specifies minimum 200 g / m2. ZN layer thickness is very important to obtain the best possible life coverings.

Total width

Effective width

Material thickness

Production length


Surface weight

1220 mm

1145 mm

0,5 mm

from 0,85 m

from 12°

cca 4,7 kg/m2

The roofs ŠKRIDPLECH, Vega, Symmetra, GAPA and AluGapa have installation plan for FREE which is based on customer requirements. The plan is suggested that should remains minimum or none waste. Useage of roof sheets is for its benefits very wide. It is suitable to cover new buildings and reconstruction of old roofs of all types..
  • low weight
  • easy and fast installation
  • lathing of 350 mm or 450 mm expansion
  • short delivery time
  • production of materials for peace
  • installation plan for free
  • long life


ŠKRIDPLECH - zloženie