MASLEN s.r.o. - Slovenský výrobca ľahkej strešnej krytiny a trapézových plechov špičkovej kvality Vám ponúka plechovú strešnú krytinu ŠKRIDPLECH, GAPA, TOPDACH, UNIDACH, Trapézové plechy, Falcovaná strešná krytina, profesionálne klampiarske náradie FREUND, AKCIA.

MASLEN s.r.o. - PLECHOVÉ STRECHY - ŠKRIDPLECH, GAPA, TOPDACH, UNIDACH

MASLEN - PLECHOVÉ STRECHY - ŠKRIDPLECH, GAPA, TOPDACH, UNIDACH, Trapézové plechy, Falcovaná strešná krytina, profesionálne klampiarske náradie FREUND, AKCIA.

MASLEN - PLECHOVE STRECHY - SKRIDPLECH, GAPA, TOPDACH, UNIDACH

MASLEN - Škridplech
ŠKRIDPLECH - lightweight roofing Print E-mail

SKRIDPLECH - MASLENSKRIDPLECH - lightweight roofing material Skridplech is made of sheet steel by cold - forming into the symmetrical shape with transverse overhang. By its shape it reminds some standard burnt clay. A module of one roof tile is 350 mm, wave’s height is 19 mm and the height of moulding is 20 mm. The sheet steel roofing Škridplech is designated to creation of lightweight roof cladding at the 16°roof slope with the transverse bonds or at 12°   roof slope without transverse bonds. An axial distance of lathering is 350 mm. An input material is sheet metal by the nominal thickness of 0,5 mm with the length of module 350 mm and height of wave is 19 mm. It is delivered in the length by individual bands from 850 mm to 6000 mm. For the fabrication it is used the sheet metal with the coating ZN 200 to 275 g/m2 + passivation + polyester with the total depth of 25 microns from the top side. In mat version it is 35 microns and in version NOVA to 50 microns. It is delivered in the broad range of hues. The width of the input sheet metal is 1250 mm. The company MASLEN uses at fabrication of roofing material SKRIDPLECH only the sheet metal with the coating ZN 275 g/m2 and more – even thought the standard determines the minimum 200g/m2. The depth ZN coating is very important for achievement of longest life- cycle of the roofing.

Total width

Effective width

Material thickness

Production length

Slope

Basic weigh

1220 mm

1145 mm

from 0,5 mm

from 0,85 m

from 12°

cca 4,7 kg/m2






For the roofing materials Skridplech and Gapa is executed a laying plan for FREE, where following the customers needs, drawing documentation and  recommendation of manufacturer is determined the length of roofing bands so the waste would be as minor as possible, respectively non. The usage of the steel roofing material is thanks to its advantages very wide. It is suitable for covering of the new buildings as well as for reconstruction of old roofs of all objects types.

ADVANTAGES OF SHEET ROOFING:
  • Low weight
  • Easy and fast assembly
  • Trusses with a 350 mm
  • Wide choice of colours
  • Low price
  • Multiple protection measures against corrosion
  • Short delivery period
  • Production made to measure
  • Laying plan preparation free of charge
  • Long lifespan



ŠKRIDPLECH - zloženie


 
Color options Print E-mail
The colors listed in the following basic color scheme according to the tones of RAL are just informative! Faulty presentation in your previewer can change the actual hue and thence we recommend using at selection color chart of sheet metal, which can be posted to you in case of need free of charge.

There are available the roofing in the surface treatment:
Polyester (depth coating 25 µm), Matte Polyester (depth coating 35 µm) and finish AkzoNobel (depth coating 50 µm).

ral_skridplech_en
 
Accessories Print E-mail
Screws
To installation of trapezoidal sheets are used special self drilling screws with the EPDM pad, which secures the tightness of the joints. The screws are delivered in the basic hues corresponding to the roofing material.

TESNIACE PÁSYCompribands
Open cell polyurethane foam tapes, aerated tapes securing the roof’s ventilation and ventilation of the interior humidit, used as filling of irregular apertures in the valley or hip, they have got from the lower side a self-adhesive tape, fabricated in the 1m lengths
used as an additional security against the driven rain, snow, dust and insect and birds on either sides of valley, Jointing wedge belt is sealed with self-adhesive layer to the valley band. At calculation we count twice the length of the valley. The number is quoted in pieces and rounded up to whole pieces.

HREBENÁČRidge tile (round)
Serve to overlapping of the ridge of the roof.used at the roofing Skridplech and Gapa – laps over the ridge and hip of the roofmanufactured in 2m lengthsby ordering we calculate all lengths of the ridge and hip and divide by 1,9 (jointing with the overlapping 10 cm)The number is quoted in pieces and rounded up to whole pieces.

Transition of the various pitches
They serve to “bypass” between two various pitches of the roof. One part is laid under the sheet and the other over the sheet. used at transition from saddleback roof to pent roof and vice- versafabricated in 2 m lengthsWe calculate all lengths of the transitions and divide by 1,9 (jointing with the overlapping 10 cm)The number is quoted in pieces and rounded up to whole pieces. In case of need it is possible to be made-to-measure in lengths up to 4 m.

Transition of various type of roofing
It serves to detachment of various type of cladding on one roof. placed along the roofingmanufactured in 2 m lengthswe calculate the lengths of cladding on the places where the lath will be used and divide by 1,9 (jointing with the overlapping 10 cm)The number is quoted in pieces and the rounded up to whole pieces. In case of need it is possible to be made-to-measure in lengths up to 4 m.

ZÁVETERNÁ LIŠTALeeward cornice under the roofing
Used for roof ending on sides in the slope. Its purpose is to avoid the blow out of the covering. it is used at pent roofs by cladding Škridlplech, Gapa and all trapeze as the ending slat on the upside of the roof. By ordering we calculate entire width of roof – top ending and divide by 1,9 (jointing with the overlapping 10 cm)The number is quoted in pieces and rounded up to whole pieces. In case of need it is possible to be manufactured in unlimited lengths, which are limited only by shipping facilities.

Side edging under the covering
Used mainly on the contacts of the roof with the vertical building construction.by ordering we calculate the length of edging in the contact of roofing with building construction and divide by 1,9 (jointing with the overlapping 10 cm)manufactured in 2 m lengthsThe number is quoted in pieces and rounded up to whole pieces. In case of need it is possible to be manufactured in unlimited lengths, which are limited only by shipping facilities.

BOČNÉ LEMOVANIESide edging on the covering
Used mainly on the contacts of the roof with the vertical building construction.by ordering we calculate the length of edging in the contact of roofing with building construction and divide by 1,9 (jointing with the overlapping 10 cm)manufactured in 2 m lengthsThe number is quoted in pieces and rounded up to whole pieces. In case of need it is possible to manufacture in unlimited lengths, which are limited only by shipping facilities.


ÚŽLABIEValley
Used for water regulation in the valley by the covering Škridplech, Gapa and all types of trapezemanufactured in 2 m lengthsby ordering we calculate lengths of all valleys and divide by 1,8 (jointing with the overlapping 20 cm)it is necessary to quote in also Combriband – sealing tape UNIThe number is quoted in pieces and rounded up to whole pieces. In case of need it is possible to manufacture in lengths up to 4 meters.
 
 

 
ODKVAPOVÉ LEMOVANIE
Gutter edging
Used for regulation of the interfluent water from the coating direct to the gutter.manufactured in 2m lengths. On demand can be made-to- measure.by ordering we calculate the lengths of all external sides, where will be placed the gutter and divide by 1,9 (jointing with the overlapping 10 cm)The number is quoted in pieces and rounded up to whole pieces. In case of need it is possible to be manufactured in unlimited lengths, which are limited only by shipping facilities.



SNEHOVÁ ZÁBRANASnow traps
Used to block the snow on the roofat the width of 1,1 m is needed to place 5 pieces of snow trapsat length of the roof over 3,5 m is to be placed next raw of snow trapsto each piece of snow trap is to be calculated 2 pieces of long bolts ( 35x4,8mm ) and 2 pieces of short bolts ( 20x4,8mm )the number is given in piecesat assembly is necessary to keep mounting instruction – mainly regarding to number of pieces in dependence on snow zone.

Skylight
The skylight serves as an exit to the roof for maintenance of chimney, roof cladding or aerial and at the same time for lighting of interiors.

ČELO HREBENÁČAEnd of ridge tile
Used to closing of the round gabled ridge tile at gabled roof from one or both sidesnumber of pieces is given accordingly to the number of free ends of gabled angle tile





RHEBENÁČ KONCPVÝ NÁROŽNÝCorner ridge end

Used for ending of the round ridge tile in the cornersnumber of pieces is given according to number of cornersmade in 0,5m length


 



ODVETRÁVACÍ PÁS MASLENVentilation band of the ridge MASLEN
Used for ventilation of roofingplaced under the ridge tile along gabled and corner ridgethe number is given in running meters with the rounding up to whole running meters




Contact high-diffusive foil
Used as a vapor preventionplaced under cross laths on entire roofing surfacethe total roofing surface is divided by 75 m2the number is given in m2 with the rounding up to whole packages ( 1 package = 75 m2).


KONTAKTNÁ FÓLIAVentilation grid
Used against the insect’s infiltration into the space under the roofingplaced under the gutter edgingthe number is given in running meters with the rounding up accordingly to the entire length of gutter edging.

Chimney’s asphalt band
Used instead of chimney sheeting the number is given in running meters according to chimney’s parameters.

OPRAVNÝ LAKRepair varnish
Used for flushing of the potential scratches induced by the conveyance and assembly. sold in pieces per 12ml, used 1 varnish into 150 m2 of roofing

Ventilation ridge 1000/50
The protection from the leaves and small animals


RPESTUPOVÁ MANŽETATransition connector
Has got universal usage (transition of sewage ventilation tube, power line, aerial) the parameter of collar is given by diameter of body transcendent over the roof.

 
Assembly Print E-mail

Roofing assembly preparation:

Before the assembly of the cladding škridplech and gapa is necessary to adjust the lathering span, eventually to add the lathering to 350 mm axially. The span between the first lath (near the gutter) and the subsequent second is 260 mm- 280 mm axially, in dependence on the roof slope. The distance of the first lath from the edging- head lath is 30 mm – 50 mm. In case that we do not use gutter edging, we recommend to nail the lath on the edge, whereas in this point we anchor the cladding behind the moulding.

strecha_rez-velka
 
By reason of air humidity condensation in the spring and autumn months we suggest using of safety hydro insulation – under-roof foil. It is essential to use this foil at heat insulated timber. The safety hydro insulation is necessary to stretch to the gutter edging or directly to the channel of the gutter system. On the foil are nailed the cross- laths lengthwise of the beams and then only the lathing. Attention: it is necessary firstly to mount the gutter brackets into the required slope on the beams / in case they will not be mounted to the front board/ and skylights according to mounting instructions supplied by manufacturer.

The assembly of the cladding:

domcekBefore the setting of the individual bands of the roofing is necessary to mount the roofing accessories as are for example: gutter edging, leeward cornice under the roofing or valleys. We stretch the bands of roofing to the roof beam over the wooden laths, eventually over the cylinders. We start to mount from the belt right bottom, which lower edge has to be parallel to the gutter. 
 
It is nailed to the construction only with some screws. Thereinafter we set the panels horizontally and also vertically according to laying plan. After checking of correctness of first three pieces setting, can we mount them properly to the construction. The sheet metal can be bolted explicitly under the wave, never on the wave. It is allowed to walk on the sheet metal only in the footwear with soft slip sole. It is allowed to tread only in wave valley on the lath-nailed places. The protection foil must be removed from the product, respectively from the cladding immediately after the mounting.

Anchoring of the roofing:

skrutka_48x20The roofing is anchored on the construction by self –drilling screws with the parameters 4,8 x 35 mm, with the pad made of special rubber EPDM. The screws have to be retightened by the electric screwdriver with the continuous power regulation. The screw is for certainly properly retightened when EPDM pad “climbs up” from under the metallic pad. An average use of screws is 6-9 pieces per m2. We place the screws circa 2 cm under the cross moulding into the wave valley, so the cladding fits tightly to the roof lath. On the joints metal-metal are used self drilling screws in parameters of4,8 x 20 mm. At longitudinal overlapping is convenient to screw the roofing circa 2 cm under the cross moulding of the tile through the wave peak.

Roof ventilation:

skrutka_48x35It is very important proper ventilation of the roof in bulk. We keep the gap on the ridge between the roofing in the width of circa 11 cm that will be covered-up by the universal ventilation band. The roof cladding is then ventilated through the vents between the ridge tile and the roofing. The ridge tiles are screwed to the cladding on every other upper wave. To the mounting of the next accessories as the snow traps, upper leeward laths, etc. , can be approached  after the anchoring of the roofing and ridge tiles. During the mounting is necessary to remove from the surface arose metal dust with the soft brush.

rozlozenie_skrutiek

В кабинете студии они нашли множество выписанных путевок.

Пожалуйста, уберите в папку финансовые документы они лежат у меня на столе,-быстро сказал он и поспешно шагнул в коридор.

спросил Арнольд, прикрепляя лампочку на дерево.

В отличие "носов мишкина каша скачать" от большинства техасских охотников, он никогда не носил ни мокасин, ни гетр, ни длинной рубахи из оленьей кожи, отороченной бахромой.

Мне нет нужды верить, "Искусство Древней Греции и Рима" что мир якобы состоит теперь не из четырех основных элементов, каковыми являются огонь, вода, земля и воздух.

Простите, проскользнув между премьером и Анной, Римо легонько ладонью съездил главу коммунистического государства по физиономии.

 
Price list Print E-mail
Cenník odkvapových systémov MASLEN Price list roofing ŠKRIDPLECH - MASLEN (PDF 770 kB)
Cenník odkvapových systémov MASLEN Price list plumbing accessories - MASLEN (PDF 360 kB)
Cenník odkvapových systémov MASLEN Price list roofing equipment - MASLEN (PDF 150 kB)
To browse the tables. pdf requires Adobe ReaderFree
You can download it from Adobe website
 


MASLEN - STEEL ROOFS

Úvod MASLEN | ŠKRIDPLECH
slovensky česky deutsch english magyar română

MASLEN s.r.o., PLECHOVÉ STRECHY - ŠKRIDPLECH, GAPA, TOPDACH, UNIDACH

MASLEN s.r.o. - PLECHOVÉ STRECHY - ŠKRIDPLECH, GAPA, TOPDACH, UNIDACH

MASLEN - PLECHOVE STRECHY - SKRIDPLECH, GAPA, TOPDACH, UNIDACH

ŠKRIDPLECH, GAPA, TOPDACH, UNIDACH

ŠKRIDPLECH, GAPA, TOPDACH, UNIDACH

ŠKRIDPLECH, GAPA, TOPDACH, UNIDACH